ORC Expert Advisory Services ORC International

  home    |    find an expert    |    request an expert    |    join our network    |    about us     expert login  
Expert Consulting and Expert Witness Services
  
  search tips 
Share this page:  Send to LinkedIn Send to Facebook Tweet This Email Print




Related Expert Areas

  

air conditioning compressor

  

refrigerant compressor

 • 

automobile air conditioning compressor

 • 

refrigerant liquid management

 • 

automobile manufacturing

 • 

air-conditioning equipment

 • 

refrigeration system

 • 

automobile

 • 

air conditioning

 • 

refrigerant

 • 

automotive engine

 • 

air conditioner

 

Air Conditioning Compressor Experts

The following experts are available as air conditioning compressor consultants and air conditioning compressor expert witnesses.  ORC experts are peer-recommended authorities who have been carefully selected and rigorously screened.
    Definition:  Air Conditioning Compressor - A refrigerant compressor that is used in an air conditioning system.

Synonyms:  air conditioner compressor, air conditioner refrigerant compressor, air conditioning refrigerant compressor

Experts Only

Join our distinguished experts for air conditioning compressor jobs, projects and consulting opportunities.


1 to 21
(of 21)
Air Conditioning Compressor Experts
Request Free
Expert Quote

Expert in Compressor Design and Evaluation
As previous Manager of Evaluation for Air Conditioning Products at the General Electric Company and co-owner of Comptest, LLC, Expert has extensive experience with the evaluation of compressors and related systems. He has completed performance, ... See full profile

Kentucky (KY), USA

Expert in Automotive Cause of Failure, Appraised Value, Lemon Law,Negligence, Standards & Practices, Tire Ind.
Expert has spent over 35 years in the Automotive Industry and is experienced in all areas of Automotive Repair, Diagnosis, and Inspection. The first part of his career was spent working as a Master Certified Technician, Service Center Supervisor, and ... See full profile

Arizona (AZ), USA

Expert in HVAC, Air-Conditioning and Fire Protection Systems
Expert is a Specialist Mechanical Engineer with excellent design experience in facilities development, Heating, Ventilation and Air-conditioning (HVAC), Fire Protection and Plumbing services for industrial and commercial building services projects. See full profile

India

Expert in Convenience Store Industry, Gift Card Industry, Automotive Industry, Rent-A-Car Industry
Expert has extensive experience in the Convenience Store Industry, the Incentive Marketing Industry, and the Automotive Industry - including Rental cars. He has consulted on many topics involving beer, beverages, bottled water, soft drinks, energy drinks, ... See full profile

Illinois (IL), USA

Expert in Automotive Global Supply Chain Management, Business Planning and Lean Change Management
Expert is a Global Supply Chain Manager, Business Planer and Lean Change Agent at a global Tier 1 automotive supplier of mobile electronics and transportation systems, including powertrain, safety, steering, thermal, controls and security ... See full profile

NRW, Germany

Expert in Automotive, Alternative Fuels, Steel and Aluminum, Petrochemical, Oil & Gas, Wind Power Industry
I am an engine and chassis engineer and hold PhDs in Material Sciences and Metallurgy. I am an automotive executive with +29 years' experience in the most relevant professional areas of the industry incl. engineering, R&D+i, quality, manufacturing, ... See full profile

Portugal

Expert in Thermal and Fluid Systems Engineering Design, Analysis, Sizing, and Project Management
Expert has 36 years of experience in the analysis, design, and development of complex thermal systems for NASA and aerospace applications. During this time, Expert had a major role in defining the thermal system designs for the International Space ... See full profile

Texas (TX), USA

Expert in Sensing & Measurements, Quantum Mechanics, Solid State, & Thermal & Optical Technology
Expert received his Ph.D. in condensed-matter physics. He used quantum mechanics and Surface Green Function techniques to calculate electronic states and electronic bands at metallic superlattices, discovering, for example, the existence--under ... See full profile

Madrid, Spain

Expert in Cleanroom Technology
Expert has applied his background in the clean room industry to help those clients who are considering the use of clean rooms for their manufacturing process. He can assist with material alternatives and equipment selection that best fits into a ... See full profile

New York (NY), USA

Expert in Mechanical Design of Thermal Systems, Energy Management, Refrigeration and Air-Conditioning, CFC
He has done his doctoral on the utilization of solar energy for refrigeration vs vapor absorption refrigeration system. He has experience in utilization of Bio gas, wind energy and septic tank biogas for thermal application. Presently He is working in ... See full profile

Rajasthan, India

Expert in Motor and Generator Design and Development
Computer-aided direct current (dc) motor design; dc motor development; ferrite motor. The most significant portion of Expert's work for the past 5 years has involved computer-aided design and product development of a variety of ... See full profile

Minnesota (MN), USA

Expert in Automotive Industry - emphasis in electric vehicles, automated/connected vheicles, body engineering
Expert has over 40 years experience in the auto industry, including 23 years at the senior management level. He has a very broad knowledge of many aspects of the industry. He has worked on many alternative fuel vehicles from hybrids to battery electric ... See full profile

Michigan (MI), USA

Expert in Automotive Powertrain Controls, ICE Fundamentals, Fuel Cells, Small Engine EMS, Exh Emission Control
Expert has extensive experience in automotive embedded system architecture, control algorithm, and calibration development, with expert knowledge of gasoline engine control strategies and Internal Combustion Engine (ICE) operating fundamentals. See full profile

New York (NY), USA

Expert in Chemical Process, Project & Commissioning Engineer. Chlorine, Bromine, Hydro-metallurgy, Plastics
Expert, Chemical Engineer with 48 years of extensive experience in the chemical industry, including design, project management, maintenance and commissioning. Expert was responsible for 3 Chloralkali mercury and membrane cell plants design ... See full profile

Israel

Expert in Refrigeration and Air Conditioning System Design, Building Cooling Load Analysis
Expert is working as professor in Refrigeration and Air Conditioning at a college in India. He is currently involved in the development of small capacity cooling appliances with CO2 and HC290 as natural refrigerants. He is experienced in the simulation of ... See full profile

MS, India

Expert in Lean Manufacturing Engineering and Production Systems Implementation
Manufacturing Engineering professional with extensive management experience in the automotive OEM and Tier 1 environment. Demonstrated success in new product program implementation and process improvement. Played a key role in the development of the GM ... See full profile

Michigan (MI), USA

Expert in Power Plants & Components, Performance, Design, Monitoring, Diagnostic; Cogeneration; Thermodynamics
Expert he has important industrial practice and gained valuable knowledge on power plants and their components while working and studying in Switzerland, Ireland, Italy, France, and Romania. Whilst at Alstom Power Switzerland, Expert held the ... See full profile

Romania

Expert in Strategy and Technology Innovation Management, Automobile Industry, OEM-Suppliers Relationships, ILO
He is working on strategic issues linked to market, design, R&D, new technologies and innovation, purchasing and organization in the automotive industry (from suppliers up to scrappers) since 1972 being a consultant to public organizations (Ministries), ... See full profile

France

Expert in Spas/Hot Tubs, Hot Water Circulation Pumps, Water Management Systems, General Marketing
Expert spent 11 years in the audio/video retail industry. During that time he was responsible for the following: Start-up -- develop retail chain from inception to twenty-two stores at $48,000,000 in annual revenues Sales, marketing, purchasing, ... See full profile

California (CA), USA

Expert in HVAC Control Systems and Equipment
Expert has devoted his professional career to the design, component selection, cost estimating, prototyping, testing, integration, interfacing, manufacturing, and trouble-shooting of control systems, primarily for HVAC equipment and ... See full profile

New Jersey (NJ), USA

Expert in Electric Motors, Generators, Wind Energy, Voltage Regulators, Fast Battery Chargers, Physics, etc.
Expert has a Master of Technology degree in applied physics. He has more than 25 years experience in the design and development of electric motors and generators for commercial and military applications. Among several hundred machines he has ... See full profile

Wisconsin (WI), USA

 
 

Need the right expert in air conditioning compressor?  We can help!

home       find an expert       request an expert       join our network       about us

Intota is now ORC Expert Advisory Services

FOLLOW ORC ON