ORC Expert Advisory Services ORC International

  home    |    find an expert    |    request an expert    |    join our network    |    about us     expert login  
Expert Consulting and Expert Witness Services
  search tips 
Share this page:  Send to LinkedIn Send to Facebook Tweet This Email Print

Related Expert Areas






chemical industry emergency shutdown procedure


emergency shutdown system


maintenance shutdown planning


facility closure


emergency management


emergency response


Chemical Manufacturers Association


total productive maintenance




chemical process safety engineering




chemical plant accident


chemical plant


fault-tolerant architecture


chemical process safety


programmable controller






chemical engineering


manufacturing procedure


maintenance planning


control system


Shutdown Experts

The following experts are available as shutdown consultants and shutdown expert witnesses.  ORC experts are peer-recommended authorities who have been carefully selected and rigorously screened.
    Definition:  Shutdown - The process of temporarily or permanently closing a facility, or causing a device, such as an engine, to cease functioning.

Synonyms:  shut-down

Experts Only

Join our distinguished experts for shutdown jobs, projects and consulting opportunities.

1 to 25
(of 67)
Shutdown Experts
Request Free
Expert Quote

Expert in Process Instrumentation and Control
Expert specified and applied analog instrumentation in manufacturing and process control for a wide range of industries, using a variety of instruments and input/ouput devices. He has also used his expertise to troubleshoot systems once installed. See full profile

Ontario, Canada

Expert in Chemical Manufacturing, Process Hazards Analysis, Hydrogen Chloride, Cl2, troubleshooting
Expert has worked hands-on with most equipment and process technology used in the chemical industry. Reaction, purification, environmental discharge prevention, adsorption, absorbtion, are but a few areas of his expertise. See full profile

Louisiana (LA), USA

Expert in Industrial Controls, Electrical and Electronic Engineering, Automated Industrial Equipment
Expert is an engineering executive who consults on both technical and commercial aspects of industrial automation and control. His engagements have included matters related to product development, ... See full profile

Louisiana (LA), USA

Expert in Electronic Equipment, Microcontroller, DSP, Interfacing, VOIP, RF communication, Software (VB/ VC++)
Expert has developed many circuits based on analog/digital inputs and outputs. For example, an RTD changes its resistance depending upon the temperature. This resistor value is converted to a voltage signal in analog form and then sent to a comparator ... See full profile

Gujarat, India

Expert in Asset Care and WCM: Maintenance, Reliability, SH&E, STR, Supply Chain for Maintenance, EAM/CMMS.
- He has applied his maintenance management background as functional developer, trainer, and project director for EAM/CMMS multi-site implementations for several industries. - It includes participation from the organization of maintenance warehouse until ... See full profile

Anzoategui, Venezuela

Expert in Pharmaceutical Manufacture and Supply in Startup New Product Companies & Acquisition Integration
Expert has successfully developed and led a diversity of complex operations and projects in a variety of cultures and environments. These range from turnarounds and startups of flagship greenfield operations to cross functional teams in world-wide new product ... See full profile

Connecticut (CT), USA

Expert in Maintenance Planning and Scheduling, Reliability and Maintenance Management, and Plant Turnarounds
Expert is a chemical engineer with 32 years' experience in asset management consulting, training and plant operations in oil and gas, mining, chemicals, pharmaceuticals and flexible packaging in global companies. He has worked as a senior consultant with ... See full profile

Goa, India

Expert in Metal Rolling Mill Equipment, Industrial & Arc Furnaces, Workplace Accidents, Patent Infringement
Expert has had responsibility for the conception, specification, design, installation, and start-up of three steel strip mills. He has worked with a 3-stand, 4-high mill that was powered by three 1000-hp motors. He also worked with a 20-high Sendzimer ... See full profile

New York (NY), USA

Expert in Total Turnaround Management, RCM, Precom & Commissioning, Bolting, Chemical decontamination
Fully conversant with P & ID's , Column internals, Erection, Hydro testing, Chemical Cleaning and Oil Flushing, Flushing and Dry out Operations, Pre-Commissioning and Commissioning of a Large PetroChemical Complex. Start-Ups , Shutdowns, Handling ... See full profile

Western Australia, Australia

Expert in Petrochemical, Pulp & Paper, distillation, Chemical Engineering, Pumps, Piping, Wastewater, CPI
Expert has many years' engineering design in the Chemical Process and Pulp and Paper fields. He has held positions of Production Engineer, Technical Director, Quality Control Engineer, Process Engineering Department Head, Senior Engineer. See full profile

Alabama (AL), USA

Expert in Oil Refining Technology
Expert has evaluated many major capital investments for petroleum refining applications. His studies have compared alternative process options, and he has evaluated pricing and cost sensitivities and all economic payout data. See full profile

Ohio (OH), USA

Expert in Economic and Forensic Analysis in Chemical Process Design, Simulation, & Operation; Activated Carbon
Expert began working as a professor in 1995 after 8 years of experience with E.L duPont, Ethyl Corporation, and Kraft, Inc. Expert worked in design/development and implemented of chemical processes that included catalyst manufacturing, CFCs, ... See full profile

New Mexico (NM), USA

Expert in Chemical Plant Safety Services, Hazard Studies, SIL, Risk Assessment, DSEAR, Water Hammer
Expert's main area of interest is chemical plant and process safety. He has led HazOp [Hazard and Operability] studies on many plants from large scale, high hazard plants using well-established technology (e.g. manufacture of hydrogen fluoride, high ... See full profile

Cheshire, United Kingdom

Expert in Oil and Gas Exploration, Production, Construction and Operation, Alternative Energy
Expert is the president of Expert's Firm, a consulting firm in the oil and gas industry. Expert has more than 25 years of varied experience in the oil and gas industry, primarily in exploration, drilling, production and ... See full profile


Expert in CDR & Reconstruction, Defective Equipment/Processes, Product Development, Manufacturability & Launch
The Automobile enthusiasm started at about 14 years old when Expert took apart his first V-8 engine and was hooked. A passion developed for automobiles, which continued to develop for 40 plus years and carries on today. During that period, Expert added a ... See full profile

South Carolina (SC), USA

Expert in Chemical Company Site and Corporate Crisis Management Planning and Security Assessment
He has over 25 years in chemical plant manufacturing as well as 2 years as Corporate Safety Director. Operating a safe plant is key to a successful manufacturing operation. As plant manager he reduced an OSHA injury rate of over 10 to less than 2 in 3 ... See full profile

New Jersey (NJ), USA

Expert in Power Electronics and Electric Drives, EMI/EMC Filter, Optoelectronics, Amplifiers for Sensors
Expert has designed analog circuits such as Amplifiers, Power supply, DC-DC converter, PLL, and Motor control for Electro-optic sensors, range finders, Laser Perimeter Awareness System, Gyroscopes and Liquid Cooling Systems. See full profile

California (CA), USA

Expert in Steel Plant Equipment: Design, Installation, Commissioning, Maintenance, Troubleshooting
When Expert started his career in a mini steel plant, it was a plant with a high degree of process automation, especially in steel wire rod mill. He started to learn to design systems to improve the operation of the plant. Later he got trained in steel ... See full profile

Uttarakhand, India

Expert in Oil & Gas/LNG/Chemical Project Development & Management; Engineering & Construction
Expert has applied professional chemical engineering knowledge, skills, and experience in evaluating, developing, and selecting alternative chemical process technologies, and has contributed to process improvements developed from existing ... See full profile

Texas (TX), USA

Expert in Strategy, Risk Management, Contingency Planning, Business Continuity
Expert is a professional manager with over 28 years of extensive management experience including full P&L responsibility. He has a proven track record of increasing profits by reducing expenses and increasing ... See full profile

Indiana (IN), USA

Expert in Electrical Power Generation and Control--Design, Project Management and Troubleshooting
Expert has provided project management, issue management, owner's engineer, agency contact, design, plant modification, installation supervision, start-up, commissioning, and troubleshooting services for power generating plants, auxiliary systems and ... See full profile

Maryland (MD), USA

Expert in Chemical Process Engineering
Expert has over 40 years of experience as a process engineer and project manager on new facilities for food, flavors, fragrances, fine chemicals, resins, and tall oils. He has taken the lead in driving R&D and manufacturing groups toward efficiency ... See full profile

Georgia (GA), USA

Expert in Instrument and Control Systems
Instrumentation; process control; chemical process control. Expert has 30 years of experience in engineering, design and specification of instrumentation and control systems for chemical and refining plants. These systems include distributed and ... See full profile

New York (NY), USA

Expert in Process Control, Process Design & Troubleshooting; Refining, Petrochemicals & Biofuels
Multitalented and versatile leadership & management skills with geographically and culturally diverse teams & projects. Broad and diverse experience in the refining, petrochemical, chemical and biofuels industries. Project management skills include ... See full profile

Texas (TX), USA

Expert in Chemical Plant Manufacturing, Process Development, Polyester Polymer, Polyester Film Coating
Expert has extensive experience working in chemical plant manufacturing at several DuPont facilities: Niagara Falls, NY; Victoria, TX; Savannah River, SC; Cape Fear, NC; Sabine River, TX; and Florence, SC. He has always worked in a technical role in ... See full profile

Arizona (AZ), USA

>> Next 25 Experts

Need the right expert in shutdown?  We can help!

home       find an expert       request an expert       join our network       about us

Intota is now ORC Expert Advisory Services